|
Search:
Advanced search
|
Browse by category:
|
Glossary | Contact Us |
|
Showing: 1-20 of 23 »»
Articles
|
||||
 |
View exported XVW files
ETM Backup Viewer
Used to view exported video files with the XVW
Files are created when backing up to USB or built-in...
|
|||
|
||||
|
ETM-120-xx Remote Client
Version 1.0 XRMS
Production ceased on the ETM-120-xx non-cdrw: August, 2006
Fully compatible with the following models:
ETM-120-04
...
|
|||
|
||||
|
Power Consumption (Watts/Amps)
General Information
All Watts readings should be noted as Active Power. This matches the way power is charged by a utility company, in...
|
|||
|
||||
|
Average bandwidth usage for Remote Client connections
DVR Bandwidth Tests
Testing was done using real-world motion scenarios in 5 minute intervals
- Individual results may vary -
ETV Series
Testing...
|
|||
|
||||
|
Convert XVW export file to AVI file
Convert files with the XVW extension to AVI files:
Create a backup CD using the DVR BACKUP menu (see pages 28-32 of the instruction...
|
|||
|
||||
|
Web interface (ActiveX) cannot connect, prompts for password, shows port 0
ActiveX control XRMS reference:
ETM-120-xx : v1.0 XRMS
ETM-120-04/09/16CDRW : v1.1 XRMS*
ETM-120-04/06/08CDRW : v1.3 XRMS*
* -04...
|
|||
|
||||
|
Save search video through the Remote Client (XRMS) software
See attached for screenshots.
You can “capture” searched video to the hard drive by following these steps:
Connect to the...
|
|||
|
||||
|
PTZ control with the remote control
This effects the following models:
ETM-120-04
ETM-120-09
ETM-120-16
ETM-120-09/CDRW
ETM-120-16/CDRW
The following models...
|
|||
|
||||
|
Cannot connect to DVR through Firefox, Safari, or Opera browser, or on an Apple computer
The web interface is compatible only with Windows, through Internet Explorer.
This is due to it requiring ActiveX, a feature only present in...
|
|||
|
||||
|
Remote Client displays 'Timeout' when trying to connect
Possible causes:
General
Maximum connections exceeds four (4). When a fifth person attempts to connect, the connection will Timeout.
...
|
|||
|
||||
|
Audio playback is choppy through the Remote Client
This is most likely to occur when connected over the Internet.
The minimum bandwidth requirements for smooth playback of audio (while viewing a...
|
|||
|
||||
|
Time in DVR Setup does not match live overlay timestamp
This is a bug in the v1.2 Remote Client software.
When you are in DVR Setup, the Time displayed will match the time on the PC you are running...
|
|||
|
||||
|
Multi-camera playback
The following models support the ability to playback multiple cameras at once:
Press the Multi button to switch to this mode from a single camera...
|
|||
|
||||
|
Remote is not responding properly
By default, the DVR is set with Remocon ID: 1 (remote control ID) in Menu > Network > Serial.
That setting is assumed to be unchanged for the...
|
|||
|
||||
|
Unable to add new remote server to Remote Client
The maximum number of remote servers that can be stored by the XRMS Remote Client software is 20.
When adding the 21st item, it will simply...
|
|||
|
||||
|
Windows 98 - Remote Software loads with broken interface (parts missing)
The window needs to be minimized and then restored to display all the contents properly in Windows 98.
See attached document for images and...
|
|||
|
||||
|
DVR prompts for password when pressing a key on the front of the unit
By default, the system has AutoKeyLock turned on as a security measure.
After 30-60 seconds of inactivity, the front face buttons of the DVR will...
|
|||
|
||||
|
Network settings reset on power loss
This can occur because the network settings have not been hard saved to the system memory for recovery procedures.
It is recommended that after...
|
|||
|
||||
|
Voltage limits on Relay outputs
The Relay has a Voltage Input Maximum of 60vDC and 1A/30vDC.
For example, 60vDC would allow a maximum of 0.5A, and 12vDC would max at 2.5A.
If...
|
|||
|
||||
|
ETM-120-xx Manual (XVR)
See attached
|
|||
|
||||
Powered by
KBPublisher (Knowledge base software)