Pink box will not disappear when rearranging camera positions

• ETM-120-09CDRW - firmware v1.62 or lower
• ETM-120-16CDRW - firmware v1.62 or lower

ETM-120-xx/CDRW - The pink or red camera position selection box does not disappear and only the power button responds.

Resolution:

When you re-arrange your cameras to new positions on the screen and CAMERA TITLE is turned OFF in settings, then the selection box does not disappear when you press the enter button. Reboot the DVR using the power button. After the system has been rebooted back to live cameras, follow these instructions to prevent this issue from happening in the future.

1. Press the MENU button

2. SYSTEM should be highlighted > press ENTER

3. Arrow down to DISPLAY > press ENTER

4. Turn CAMERA TITLE to ON

5. Press the ESC button 3 times to get back to live cameras