Main page | Knowledge Base | About us | Support | Warranty | E-Catalog | Careers | Dealers | Contact us
Electronics Line USA Knowledgebase
Search:     Advanced search
Browse by category:
Glossary | Contact Us
Knowledgebase / ETM DVR Series / ETM-120-xxCDRW DVR Series / Time in DVR Setup does not match live overlay timestamp

Time in DVR Setup does not match live overlay timestamp
Print
Email to friend
Views: 158
This is a bug in the v1.2 Remote Client software.


When you are in DVR Setup, the Time displayed will match the time on the PC you are running the client on. The Live image timestamp represents the actual time set on the DVR .

Note: You cannot adjust the DVR time remotely.

©2007 Electronics Line USA
Attached files
file ETM XVR 120 240 FAQ.pdf (130 kb)
file ETM-120-04,09,16 CDRW FAQ.pdf (144 kb)

Also read
document ETM-120-xxCDRW Remote Client
document ETM-120-xx Remote Client

Others in this Category
document ETM-120-xxCDRW Remote Client
document View exported XVW files
document ETM-120-xxCDRW Backup Guide
document Convert XVW export file to AVI file
document ETM-120-xxCDRW Manual
document Pink box will not disappear when rearranging camera positions
document Unable to add new remote server to Remote Client
document Setup Dynamic DNS service ( ipsddns.com ) for the ETM-120-xxCDRW
document Remote Client displays 'Timeout' when trying to connect
document Rear outputs for video
document Multi-camera playback
document DVR prompts for password when pressing a key on the front of the unit
document USB flash drive not recognized for backup
document Network settings reset on power loss
document Remote is not responding properly
document Audio playback is choppy through the Remote Client
document Audio does not work through Remote Client
document Remote Client displays 'Model Mismatch'
document Unable to playback files converted to AVI or MPEG through Backup Viewer
document Unable to change 'Channels' option during backup
document When accessing search, video will not play or respond properly
document Fast forward not responding properly
document Voltage limits on Relay outputs
document Power Consumption (Watts/Amps)
document Camera image is black through RMS
document Windows 98 - Remote Software loads with broken interface (parts missing)
document Average bandwidth usage for Remote Client connections
document Cannot connect to DVR through Firefox, Safari, or Opera browser, or on an Apple computer
document Backup stops at 'Backup Progressing' and never finishes
document Save search video through the Remote Client (XRMS) software
document PTZ control with the remote control
document No icons visible in live view
document Fast forward freezes after a few seconds
document HOWTO: Software configuration after default settings have been applied
document Web interface (ActiveX) cannot connect, prompts for password, shows port 0
document Setting up control of a SD-25 camera using the EL-2000mini and ETM-120-xxCDRW DVR
document ETM - Cannot Search or Backup Video [Recovery Mode]


RSS
Powered by KBPublisher (Knowledge base software)

Copyright © 2004-2008 Electronics Line USA. All rights reserved.
Electronics Line USA | 5637 Arapahoe Avenue Boulder, CO 80303 | tel. 303.938.1133 toll-free 800.683.6835 fax 303.938.8062